Konica Minolta Printgroove - Manual (Page 189)

Drawing Image and Placing Object 6
Printgroove POD Ready 6-9
“Reference Line” can be shown on the page.
Only one “Vertical reference line” and one “Horizontal reference line” are dis-
played on the page.
“Reference Line” is able to be moved by drag and drop operation. If the line
is dragged, dimension from the origin is displayed near the mouse pointer.
Which of those (“Grid” or “Reference Line”) is available is also specified in
[Rulers & Units] sheet of [Settings] dialog.
2
Note
– You can set the grid settings under [Rulers & Unit] sheet of [Setting]
dialog. About details, please refer to “Settings” on page 7-2.
– About details of reference line, please refer to “Settings” on
page 7-2.
To display or hide the grid/reference line in [Page Area], follow these
steps:
1
Select [View] - [Grid].
By selecting, the grid/reference line can be alternately shown and hid-
den.
2
Note
– When there is no check mark in front of [Grid], click [Grid] to select
the check mark and display the grid/reference line.
– When there is a check mark in front of [Grid], click [Grid] to clear the
check mark and hide the grid/reference line.