Konica Minolta Printgroove - Manual (Page 158)

Editing Document 5
Printgroove POD Ready 5-40
3
If necessary, change the type of the selected page using list of [Page
Type].
– Empty Sheet: You can use empty sheet which can be edited.
– Interleaving Sheet: You can use a special kind of sheet and you can
edit this type of sheet.
– Tab Sheet: You can use a sheet that will be having an extended
area over the edges and you can edit sheet using [Page] - [Edit Tab
Sheet] menu.
– Slip Sheet: You can use a special kind of sheet but you cannot edit
this type of sheet.
– Perfect Bind Cover: You can use another sheet for Perfect Bind
Cover when [Product Type] is [Perfect Binding Single Sided] or
[Perfect Binding Double Sided].
– Uneditable Cover: You can use another sheet for Cover but you
cannot edit this type of sheet.
– [Page Type] is selected based on the details present in the Job
Ticket. If you are creating a new job, it is selected based on the
Page Type selected in [Startup] screen.
4
If necessary, change the size of the paper on which print operation
should be carried out using list of [Paper Size]. When you want to set
custom paper size, follow the procedures of “To set customer paper
size, follow these steps:” on page 5-42.
– If paper size is changed, contents in the page is not enlarged / re-
duced.
– When paper size is changed, the content of original page is ar-
ranged on the resized page based on the left top of the page.
– In case of the size of raster image such as scan page is smaller than
paper size, Printgroove POD Ready cannot draw any raster object
such as pen on the gap. Printgroove POD Ready can only draw
vector object there. To clarify the area of gap for the user, the area
will be filled by diagonal.
– In case of the size of raster image such as scan page is smaller than
paper size, the raster image will be aligned left top of resized paper.
5
If necessary, specify whether use wide paper size (check: on) or not
(check: off) at [Wide Paper].
6
If necessary, change the orientation of the paper.
– You can select from [Portrait] or [Land Scape].
7
If necessary, change the type of the paper using list of [Paper Type].
8
If necessary, change the weight of the paper using list of [Paper
Weight].