Konica Minolta Printgroove - Manual (Page 113)

Start Printgroove POD Ready 4
Printgroove POD Ready 4-32
4.6 Export Project To Local Disc
You can export a job saved to the [Repository Panel] to the local disc.
You can import the exported job using with [File] - [Import Project From Local
Disk] menu.
This menu is enabled only in Standalone or with QUEUE mode after selecting
a job in the job list of [Repository Panel].
2
Note
– About the detail of [Repository Panel], please refer to “Repository
Panel” on page 3-46.
To export the job to local disk, follow these steps:
1
Select the job which you want to export from [Repository Panel].
– To display [Repository Panel], select [View] - [Repository Panel] or
clicks [Show Repository] at the left bottom of the main window.
2
Select [File] - [Export Project to Local Disk] menu.
[Export Project to Local Disk] dialog appears.
3
Select the location to export and the name of the export file, and click
[Save].
When the job is exported successfully, a message appears. Click [OK].