Konica Minolta Printgroove - Manual (Page 98)

Start Printgroove POD Ready 4
Printgroove POD Ready 4-17
4.2.2 From Opening Job To Exiting
To start with Queue Mode and open job, follow these steps:
1
Launch Printgroove POD Ready.
[Startup] screen appears.
– When [Start Screen] is not appeared, go to Step 3.
– If you check [Don’t show this dialog on startup], [Startup] screen will
not be appeared at the next launching.
2
Click [Close].
3
Select the job which you want to open from [Repository Panel].
– To display [Repository Panel], select [View] - [Repository Panel] or
clicks [Show Repository] at the left bottom of the main window.
4
Select [File] - [Open Project] menu.
The selected job opens to edit in main window.
– If there is an already opened modified job in the editor then the
message to prompt to save the job appears.
When you save the job, click [Yes].
The job is saved to the [Repository Panel] and the selected job
opens to edit.
When you discard the job, click [No].
The job is discarded and the selected project opens to edit.
5
If necessary, edit the job.