Konica Minolta Printgroove User Manual

Page 105

Advertising
background image

Start Printgroove POD Ready

4

Printgroove POD Ready

4-24

To import an already job which is exported from Printgroove POD
Ready and exists in the local disc, follow the procedures of “Import
Project From Local Disc” on page 4-30.

To view the print preview, follow the procedures of “Print Preview”
on page 4-33.

To print proof, follow the procedures of “Proof Print” on page 4-35.

9

To save the job, follow select [File] - [Save] menu.
The job is saved to the [Repository Panel].

To export the job, follow the procedures of “Export Project To Local
Disc” on page 4-32.

10

To close the job, select [File] - [Close Project] menu.
When the job is not saved, the message to prompt to save the project
appears.

When you save the job, click [Yes].
The job is saved to the [Repository Panel] and closed.

When you discard the job, click [No].
The job is discarded and closed.

11

To exit from Printgroove POD Ready, select [File] - [exit] menu.
When the job is not saved, the message to prompt to save the project
appears.

When you save the job, click [Yes].
The job is saved to the [Repository Panel] and you can exit from
Printgroove POD Ready.

When you discard the job, click [No].
The job is discarded and you can exit from Printgroove POD Ready.

4.3.2

From Opening Job To Exiting

To start in Standalone Mode and open job, follow these steps:

1

Launch Printgroove POD Ready.
[Startup] screen appears.

When [Startup] screen is not appeared, go to Step 3.

If you check [Don’t show this dialog on startup], [Startup] screen will
not be appeared at the next launching.

Advertising