Konica Minolta Printgroove - Manual (Page 192)

Drawing Image and Placing Object 6
Printgroove POD Ready 6-12
6.4 Pencil
You can draw using Pencil tool in the specified raster area in [Page Area].
2
Note
The diameter for Pencil tool is one unit and the diameter for Brush tool is
five units.
To draw with Pencil tool, follow these steps:
1
Double click on [Page Area] to switch the edit mode to “Raster Edit
Mode”.
[Property Panel] will be hidden. Non raster area will be covered with
slash.