Pioneer PDP-LX5090H - Manual (Page 34)

Setting up 08
34
En
AV Selection
Select from the seven viewing options, depending on the current
environment (e.g., room brightness), the type of the current TV
programme, or the type of images input from external equipment.
Your flat screen TV has been adjusted to provide optimum sound
quality for each AV Selection option. However, you can adjust it to
your preference.
1 Press HOME MENU.
2 Select “Setup” ( / then ENTER).
3 Select “Picture” ( / then ENTER).
4 Select “AV Selection” ( / then ENTER).
5 Select the desired option ( / then ENTER).
For AV source
For AV source
For PC source
6 Press HOME MENU to exit the menu.
Note
• As “OPTIMUM” automatically optimizes image quality, the
process in which image settings such as brightness and tint
gradually change may be seen on the screen. This is not a
malfunction.
OPTIMUM
STANDARD
DYNAMIC
MOVIE
SPORT
GAME
USER
AV Selection
Item Description
OPTIMUM Automatically adjusts the brightness of the image
to the optimum level in accordance with the
brightness level of the viewing area.
This setting is shared by both the external inputs
and TV input sources.
STANDARD For a highly defined image in a normally bright
room.
This setting is shared by both the external inputs
and TV input sources.
DYNAMIC Sharp imaging with the maximum contrast.
Note that this mode does not allow manual image
quality adjustment.
This setting is shared by both the external inputs
and TV input sources.
MOVIE Optimized for movies.
This setting is shared by both the external inputs
and TV input sources.
SPORT Optimized for sports programmes.
This setting is shared by both the external inputs
and TV input sources.
GAME Lowers image brightness for easier viewing.
This setting is shared by both the external inputs
and TV input sources.
USER Allows the user to customize settings as desired.
You can set the mode for each input source.
Item Description
STANDARD For a highly defined image in a normally bright room
USER Allows the user to customize setting as desired.
You can set the mode for each input source.
PDP-LX609H.book Page 34 Wednesday, August 6, 2008 4:00 PM