Pioneer PDP-LX5090H - Manual (Page 56)

Useful adjustment settings 11
56
En
Colour system setting
If an image does not appear clearly, select another colour system
(e.g., PAL, NTSC).
1 Repeat steps 1 to 3 provided for Switching the vertical drive
mode (AV source only).
2 Select “Colour System“ ( / then ENTER).
3 Select a video signal system ( / then ENTER).
You can select “Auto”, “PAL”, “SECAM”, “NTSC”, or “4.43NTSC”.
With “Auto” selected, input signals are automatically identified.
4 Press HOME MENU to exit the menu.
Note
• The factory default is “Auto”.
• You do not need to enter any setting if “HDMI Input” has been
selected.
• You need to perform colour system setting for each of “INPUT
1”, “INPUT 2”, “INPUT 3” and “INPUT 5”.
• For the colour system setting, see steps 12 and 13 under Setting
up analogue TV channels manually on page 31.
Selecting a game mode
When playing a game, you can use this function to establish a
preference for image quality or operability.
1 Repeat steps 1 to 3 provided for Switching the vertical drive
mode (AV source only).
2 Select “Game Control Pref” ( / then ENTER).
3 Select “On” or “Off” ( /then ENTER).
4 Press HOME MENU to exit the menu.
Note
• The “Game Control Pref” is only available when using an
external input (except a PC source) and “GAME” is selected in
“AV Selection”.
• The “Game Control Pref” options are not effective when PC
signals are received (when a PC source menu is displayed on
the screen).
• The “On” setting is not effective when freezing images or in the
multiscreen mode.
Selecting a screen size manually
Press f to switch among the screen size options selectable for the
type of video signals currently received.
Each time you press f, the selection is switched.
The selectable screen sizes differ depending on the types of input
signals.
Important
• If images with black bands on both sides or top and bottom of
the screen – when using the “4:3”, “FULL 14:9” or “CINEMA 14:9”
modes, for example – are displayed continuously for long
periods or for shorter periods of time over several days, image
retention may result. It is recommended that you enjoy
watching images displayed in full screen, except when doing so
may result in copyright infringement.
AV source
PC source
Item Description
On Establishes a preference for operability
Off Establishes a preference for image quality
Item Description
Auto Adds side masks or displays the image in full
screen when High Definition pictures containing
side masks are detected. See
Detecting side masks
on page 57.
4:3 For standard 4:3 pictures. A side mask appears on
each side.
FULL 14:9 For 14:9 squeeze pictures. A thin side mask
appears on each side.
CINEMA 14:9 For 14:9 letterbox pictures. A thin side mask
appears on each side, and you may also see bars
on the top and bottom with some programmes.
WIDE Pictures progressively stretch toward each side
WIDE 1 Pictures progressively stretch toward each side
WIDE 2 Pictures evenly stretch toward each side
FULL For 16:9 squeeze pictures
Dot by Dot Matches input signal to the same number of
screen pixels (selectable for 1080i or 1080p signals
only)
ZOOM For 16:9 letterbox pictures. Bars may appear on the
top and bottom with some programmes.
CINEMA For 14:9 letterbox pictures. Bars may appear on the
top and bottom on some programmes.
Item Description
4:3 Fills the screen without altering the input signal
aspect ratio
FULL Full 16:9 screen display
PDP-LX609H.book Page 56 Wednesday, August 6, 2008 4:00 PM