Controlling other equipment using the supplied, Remote control unit, Controlling other – Pioneer PDP-LX5090H User Manual

Page 86: E controlling other, Button. see controlling other, Using with other equipment 12

Advertising
background image

Using with other equipment

12

86

En

Controlling other equipment using the
supplied remote control unit

Using the supplied remote control unit, you can control other
equipment in connection: a set-top box (STB), DVD player, DVD/
HDD recorder (DVR), BD player or VCR.

Before using this function, you need to preset the supplied remote
control unit with the manufacture code of the equipment to be
controlled. When you then want to control the equipment, press
SELECT on the remote control unit to select an appropriate mode
depending on the equipment; the selection is switched among TV,
STB, DVD/DVR, and VCR. The corresponding mode indicators on
the remote control unit show the currently selected mode.

• When you control a BD player, select the DVD/DVR mode.

Presetting manufacture codes

1

Press SELECT on the remote control unit to select the STB,

DVD/DVR, or VCR mode depending on the equipment.

2

After confirming that the indicator of the previously selected

mode goes off, press and hold SELECT, and then press 1 on the
remote control unit.
The corresponding mode indicator flashes.

3

Press 0 to 9 to enter a three-digit manufacture code.

See the manufacture code list to identify an appropriate code.

The mode indicator lights up for approximately one second and
then goes off; presetting the manufacture code is completed.

Note

• If you perform no operation for approximately one minute while

a mode indicator is flashing, the code presetting procedure is
quitted.

• If you enter a code not listed in the table, a mode indicator

flashes quickly for approximately one second and then flashes
as before.

• To quit the code presetting procedure halfway while a mode

indicator is flashing, you may press

SELECT on the remote

control unit.

• The factory default manufacture codes for the STB, DVD/DVR,

and VCR modes are “000”, “100”, and “500” respectively.

Manufacture codes

• You may not be able to control some equipment in the tables

partially or entirely with the supplied remote control unit.

STB

000

PIONEER 1 (factory default)

001

PIONEER 2

002

CANAL SATELLITE

003

HUMAX

004

PACE 1

005

PACE 2

006

QUALI-TV

007

SKY DIGITAL

DVD

100

PIONEER 1 (factory default)

101

PIONEER 2

102

AKAI

103

DENON

104

HITACHI

105

JVC

106

KENWOOD 1

107

KENWOOD 2

108

PANASONIC 1

109

PANASONIC 2

110

PHILIPS 1

111

PHILIPS 2

112

SAMSUNG

113

SHARP

114

SONY 1

PDP-LX609H.book Page 86 Wednesday, August 6, 2008 4:00 PM

Advertising
This manual is related to the following products: