Pioneer PDP-LX5090H - Manual (Page 44)

Enjoying DTV/SAT broadcasts 09
44
En
Viewing the “InfoBanner”
When tuning in a TV channel or an input signal changes, an
information banner (“InfoBanner”) automatically appears at the top
of the screen. While watching a programme, press
p to display the
InfoBanner (additional). Press EXIT or p again to hide the banner.
1 Broadcast signal - S (Satellite)/D (Digital)/A (Analogue)
2 Channel number
3 Station name
4 Programme title
5 Sound multiplex information
6 Current time
7 Program time schedule
8 Next programme time schedule/title
9 Subtitle icon
10 Teletext icon
11 Signal information (HD/SD)
12 Favourite icon
A separate banner also appears at the bottom of the screen
showing the AV Selection mode (bottom left) and screen size
(bottom right).
Note
• The “InfoBanner” (additional) appears when:
– pressing p while watching a TV or video programme
– pressing p while the “InfoBanner” is displayed
• The above information is not displayed if it is not included in
broadcast signal.
• During multiscreen mode, the banner appears in both main and
sub screens.
Viewing subtitles
When in the DTV or SAT mode, press [ to turn subtitles on and off.
Note
• When a programme is recorded with this function on, subtitles
are also recorded.
You can also use the TOOLS Menu to select subtitles. Follow the
procedure below.
1 Press TOOLS.
2 Select “Subtitle” ( /).
3 Select the desired subtitle ( /).
Selecting “Off” causes the subtitle to disappear.
This option toggles between “On” and “Off” for analogue
broadcasts.
Reconfiguring the DTV/SAT channel
settings
This section describes how to reconfigure the DTV/SAT channel
settings after setting up DTV/SAT channels using Auto Installation
(page 29). You can select “Digital Tuner Setup” only when watching
DTV/SAT channels. To manually set satellite TV channels, see
page 29.
Reselecting a country
1 Press HOME MENU.
2 Select “Setup” ( / then ENTER).
3 Select “System Setup” ( / then ENTER).
4 Select “Digital Tuner Setup” ( / then ENTER).
5 Select “Installation” ( / then ENTER).
The password entry screen appears. Enter your four-digit password
using buttons
0 to 9.
6 Select “Digital Setup” ( / then ENTER).
7 Select “Country” ( /).
8 Select a country ( /).
Note
• The password entry screen does not appear if you have disabled
the password function. For details, see Using a password on
page 60.
• You can select “Digital Tuner Setup” only when watching DTV/
SAT channels.
XXXX S 9999 XXXXXXXXXXXXXXXXX STEREO 21:30
2 1 3 4 5 6
“InfoBanner”
SD
XXXX S 9999 XXXXXXXXXXXXXXXXX STEREO 21:30
10:00-11:00
Next 11:00-12:00 Nxtworld...
7 8 9 11 12 10
“InfoBanner” (additional)
Subtitles On
Replace Existing Channels
Add New Channels
Country : UK
Aerial Power : Off
Signal Check
PDP-LX609H.book Page 44 Wednesday, August 6, 2008 4:00 PM