Toshiba Magnia 7100 User Manual
Page 54
44
Utilities
Starting the Utilities from the Utility Partition
Starting the Utilities from the Utility Partition
The Utility Partition is a partition where the maintenance tools are stored and created.
1.
Switch on the server.
2.
As the system boots, the following message (SMC BIOS) is displayed, press <Ctrl> +
<t> within four seconds after the message appears to boot to the Utility Partition.
3.
When the Utility Partition is activated, the following message is displayed:
Utility Partition is successfully activated.
4.
When selecting the Utilities" option in the [Main Menu] screen, the utility menu is
displayed.
Selectable items when the Utilities is started from Utility Partition
Selectable items
Setup Information
Create Floppy Disks
HW System Configuration
RAID Configuration
HW Diagnostics
Update Program
Utility
Menu
screen
(started
from
Utility
Partition)
SMC BIOS xxx.xx.xxx
©xxxx,TOSHIBA CORPORATION. All Rights Reserved.
Key is accepted. (*)
Press <Ctrl>+<t> keys
within four seconds
after the appearance of the message.
NOTE: If the disk access fails, the following message appears:
Error detected. Utility Partition is not activated.
If the Utility Partition does not exist, the following message appears:
Utility Partition is not found.