Toshiba Magnia 7100 - Manual (Page 70)

58
HW Diagnostics
Execution of test
Execution of Test
During 'DIAGNOSTIC TEST' and 'RUNNING TEST', the following screen is displayed:
Sample screen during the test
XXXX TEST
Indicates the name of the test being executed.
SUB TEST
Indicates the subtest number, and the step number of the test being executed.
PASS COUNT
Indicates the pass count of the test.
WRITE DATA
Indicates the write-data.
READ DATA
Indicates the read-data.
ADDRESS
Indicates the address of the test being executed.
STATUS
Indicates the status of the test being executed.
If any errors occur during the test, the message "ERROR OCCURRED!" is displayed. The
error name is also displayed under the message "ADDRESS".