Toshiba Magnia 7100 - Manual (Page 79)

67 HW Diagnostics
SAF-TE TEST
SAF-TE LED Reset (No Error Flag) Hit any key
When the message above is displayed, check that all LEDs of the hard disk drives switch
off. Press the <Enter> key.
SAF-TE TEST (SAF) Error log
Status Error name Meaning
01 SAF-TE TEST ERROR SAF-TE controller has not been detected.
[12. SMC TEST]
To test the SMC functions and the LED display functions.
[01. Self&Sensor test]
The self and sensor test for each controller is performed with the results displayed.
[02. Front Panel test]
Verifies the functions of LED, LCD panel. Check that:
LED test:
Please check LED all GREEN. OK (Y) / FAILED (N)
Please check LED all ORANGE. OK (Y) / FAILED (N)
Please check LED all OFF. OK (Y) / FAILED (N)
Please check HddFaultLED ON. OK (Y) / FAILED (N)
LCD test:
Please check LCD all ON. OK (Y) / FAILED (N)
Please check LCD all OFF. OK (Y) / FAILED (N)