Toshiba Magnia 7100 User Manual
Page 74
62
HW Diagnostics
PRINTER TEST
[05. PRINTER TEST]
To test the operation of the printer port.
[01. Print Ripple pattern]
This subtest prints characters for codes 20h through 7Eh, line-by-line, while shifting one
character to the left at the beginning of each new line.
Print Ripple Pattern Example
PRINTER TEST (PRT) Error log
Status
Error name
Meaning
01
TIME OUT
Time
out
of
printer
control
[06. SCSI HDD TEST]
This test checks the HDD functions connected to the SCSI-Bus through ASPI driver software.
Before running the test, the items for testing must be designated.
HOST ID NUMBER
This option sets the target host adapter number. When you choose "ALL", the subtest, tests all
disks connected to the server The next options, SCSI ID and CHANNEL number, will be
ignored.
SCSI ID NUMBER
This option sets the SCSI ID to test. You can specify just one ID to test,except ID:7.
CHANNEL NUMBER
If the server has multiple SCSI channels, this option sets the channel number to test.
[01. Sequential address read]
This subtest is a sequential reading of all the blocks on the HDD starting at block 0.
[02. Connection]
This subtest reads the logical sector at the end of the HDD, and then recognizes if the drive
is connected.