Brother PC 3000 - Manual (Page 55)

52
Changing the darning stitch length
Changing the darning stitch width
Touch the “ ” or “ ” stitch width key to select
the desired width.
1 Automatic stitch width setting: 7.0 mm
(9/32")
2 : Narrower
2 1
Touch the “ ” or “ ” stitch length key to select
the desired length.
1 : Longer (less dense)
2 Automatic stitch length setting: 2.0 mm
(5/64")
3 : Shorter (more dense)
* If the fabric does not feed (for example, because
the fabric is too thick), touch the “
” stitch
length key to increase the stitch length.
2 3 1