Brother PC 3000 - Manual (Page 64)

61
5. Smooth the gathers by ironing them.
GATHERING
1. Select a stitch length of 4.0 mm (5/32") and a weak thread
tension.
2. Attach presser foot “J”, then pull out about 5 cm (2") of both
the bobbin and upper threads.
1 Upper thread
2 Bobbin thread
3 About 5 cm (2")
3. Sew two rows of straight stitches parallel to the seam line,
then trim off the excess thread leaving 5 cm (2") .
1 Seam line
2 1.0 to 1.5 cm (25/64" to 19/32")
3 About 5 cm (2")
4. Pull the bobbin threads to obtain the desired amount of gather,
then tie the threads to secure them.
For the waists of skirts, the sleeve openings of shirts, etc.
J
01
1
2
3