Brother PC 3000 - Manual (Page 60)

57
1. Attach presser foot “J”, then place the right sides of the fabric
together and sew straight stitches up to the area where the
zipper will be attached. Then, baste at opening (the zipper
area).
1 End of opening
2 Reverse stitch
3 Basting
4 Reverse side
2. Press open the seam allowance, then attach the zipper with
basting up the middle of the zipper tape.
1 Zipper
2 Basting
3 Reverse side
3. Attach the right pin of presser foot “I” to the presser foot holder
and sew on the zipper with the right side of the fabric facing
upward, then remove the basting stitches.
* When using presser foot “I”, adjust the thread tension to the
thickness of the zipper.
1 Right side of fabric
Centered application
ZIPPER INSERTION (CENTERED AND SIDE APPLICATIONS)
For attaching zippers
I
00
2
3
6
5