Brother PC 3000 - Manual (Page 9)

6
OTHER ENCLOSED ACCESSORIES
Needle set
1
90/14: 4 pcs
X58358-001
14 Golden needle
(for stretch fabrics):
2 pcs
2 Cleaning brush X59476-051
3 Seam ripper X54243-001
4 Screwdriver (large) X55467-051
5 Screwdriver (small) X55468-051
6 Bobbin (3) 136492-151
7 Spool cap (small) 130013-053
8 Spool cap (large) 130012-053
9 Eyelet punch 135793-001
10 Net* XA5523-050
11 Extra spool pin* XA3336-051
12 Spool felt X57045-051
13 Disc-shaped screwdriver XA2005-051
14 Foot controller XA3931-051
15 Hard case XA2482-051
16 Twin needle X59296-001
No. Part Name Part Code
* Always use a thread net with metallic threads.
* When using special threads which quickly wind
off the thread spool, place a net over the spool
before sewing.
* The extra spool pin, which
is provided as an accessory,
should be attached to the
end of the bobbin winder
shaft during use.
Note (For U.S.A. only)
Foot controller: Model N5V
This foot controller can be used for sewing machine
model PC-3000.
OPTIONAL ACCESSORIES
1 2 3
4 5 6
7 8 9
10 11 12
13 14 15
16
1 2
3 4
1– Walking foot*
Parts code: X81065-001
2– Side cutter
Parts code: X81028-001
3– Stitch guide foot “P”
Parts code: X51804-001
4– Quilting foot
Parts code: XA4322-001
* If using the walking foot, please refer to page
97 for HOW TO USE WALKING FOOT (OP-
TIONAL ACCESSORY).