Brother PC 3000 - Manual (Page 57)

54
1. Touch the “ ” or “ ” stitch length or stitch width key to
select the eyelet size.
2. Attach presser foot “N”, check the needle drop point and lower
the presser foot, then press the “START/STOP” button to start
sewing.
* Before stopping, the machine will automatically sew a rein-
forcement stitch after the darning is finished.
1 Needle drop point
3. Make a hole at the center using the eyelet punch.
EYELET STITCH
For sewing eyelets on belts, etc.
Size of eyelet (Actual size)
A– Large: 7.0 mm (9/32")
B– Medium: 6.0 mm (1/4")
C– Small: 5.0 mm (13/64")
N
22
A B C