Brother PC 3000 - Manual (Page 8)

5
I II
III
A. MAIN POWER SWITCH AND
CONNECTORS
1 Main power switch
Use to turn on/off the main power.
2 Foot controller jack
Use to connect the foot controller.
3 Power cord
Use to connect the machine to the power sup-
ply.
CAUTION
–
When leaving the sewing machine
unattended, the main switch of the
machine must be switched off or the plug
must be removed from the socket-outlet.
– When servicing the sewing machine, or
when removing covers or changing bulbs,
the machine or the electrical set must be
unplugged.
– For U.S.A. only
This appliance has a polarized plug (one
blade wider than the other). To reduce the
risk of electric shock, this plug is intended
to fit in a polarized outlet only one way.
If the plug does not fit fully in the outlet,
reverse the plug. If it still does not fit,
contact a qualified electrician to install the
proper outlet. Do not modify the plug in
any way.
B. FLATBED ATTACHMENT WITH
ACCESSORY COMPARTMENT
I Tilt the lid of the accessory compartment toward
you to open it.
II Each presser foot can be identified by the sym-
bol on it.
1 Presser foot symbol
III
COMPARTMENT ACCESSORY LIST
The location of each accessory is shown in fig-
ure III.
1 Buttonhole foot “A” X57789-101
2
Overcasting foot “G” X51162-001
3 Monogramming foot “N” 137988-101
4 Zipper foot “I” X59370-051
5
Space for Zigzag foot “J” 137748-101
6 Blind stitch foot “R” X56409-001
7 Button-sewing foot “M” 130489-001
8
Seam ripper X54243-001
9 Bobbins 136492-151
; Needle set X58358-001
No. Part Name Part Code
* The spaces marked with “
★” are empty. No en-
closed accessories fit in these spaces.
* Always use the plastic bobbin which is supplied
with the machine or in the accessory compart-
ment.
* Always use BROTHER accessories with this
machine.
2
1
3
1
J
5
1
2
4
3
6
8
9
10
★
★
7