Philips AVENT Vigilabebés DECT - Manual (Page 11)

11
D Note:
The message ‘Not Linked’ also appears on the
display of the parent unit when the baby unit is
switched off.
7 Menu options
All functions can be operated on the parent unit,
but some functions can also be operated on
the baby unit.
7.1 Menu operation - general
explanation
D Note:
Menu functions can only be operated when a
connection has been established between the
baby unit and the parent unit.
1
Press the MENU button to open the
menu (Fig. 30).
• The first menu option appears on the
display.
2
Use the – and + buttons to select the desired
menu option (Fig. 31).
D Note:
The arrow indicates in which direction you
can navigate.
3
Press the OK button to confirm (Fig. 32).
4
Use the + and - buttons to select the desired
setting.
5
Press the OK button to confirm.
• The new setting flashes once. The message
‘saved’ also flashes once and then
disappears from the display.
6
Press the MENU button again to exit the
menu.
3
To stop the lullaby, press the play/stop button
E on the baby unit again. (Fig. 28)
4
To select another lullaby when a lullaby is
playing:
• Press the lullaby button K on the baby
unit within 2 seconds to toggle through
the list of lullabies.
D Note:
If you do not press the lullaby button Kfor
more than 2 seconds, the lullaby shown
on the display starts to play.
6.7 Humidity
When there is a connection between the baby
unit and the parent unit, the humidity level is
shown on the display of both units.
The optimal humidity level is between 40%
and 60%. It is very important to maintain the
correct humidity level as it helps to protect your
baby from irritation of the mucous membranes,
dry and itchy skin, chapped lips and a dry, sore
throat. When the mucous membranes do not
function optimally, they cannot give your baby full
protection from all kinds of germs. This increases
the chance of your baby catching a cold or the
flu, and reduces its resistance to infections from
mould and bacteria.
The Philips AVENT Ultrasonic Humidifier can
help you improve the air quality and maintain a
comfortable humidity level in your baby’s room.
Contact your local Philips Consumer Care Centre
for stockists.
D Note:
The baby monitor only measures the
humidity level. You cannot adjust the humidity level
with the baby monitor.
6.8 Out of range alert
When the parent unit is out of range of the baby
unit, the parent unit beeps from time to time and
the messages ‘Searching’ and ‘Not linked’ appear
on the display. The LINK light on the parent
unit flashes red.
ENGLISH