Barracuda Networks VERSION SP4 - Manual (Page 121)

119 Barracuda NG Network Access Client - Administrator’s Guide
9.8.12 Test Reports
Test reports are saved on a first come first served basis. Test results with Action Pass are indicated by
a green icon ( ), test results with Action Blocked are indicated by a red icon ( ).
Changing any parameter in any configuration area that influences the result of a test report leads to a
status icon change in the overview window. Green icons ( ) will become red ( ). To apply the new
conditions to an already existing test report, select the data set in the overview window of the
Test
Reports window and click Rectify .
Select a report and click Edit … to open the test result in the Rule Tester window. You may now use the
report as template for further connection tests.
Test Click Test to test the connection and display the test result in the section below.
List 9–10 Rule Tester parameters – section TEST RESULT
Parameter Description
Test Status Icon /
Action A connection attempt with the given values can either have failed or have been successful if a rule is applicable. A failed
connection will be indicated by symbol and
Action field Block . A successful connection attempt will be indicated by
symbol and Action field Pass .
Rule The Rule field displays the applicable rule responsible for the rule test result. Click Edit … to open and modify the
corresponding rule. If the connection attempt has been blocked because no rule has applied, the field will display the string
<No Matching Rule Found> .
Service This field displays the applicable Service Object .
PlugIn If applicable, this field displays the name of the PlugIn that has been employed in the connection.
Save Result to Insert the report name and click Save Result to to save the test result. The output of the connection test is written to the
Test Report view (9.8.12 Test Reports, page 119).
Attribute/Value listing This listing displays attributes of the tested connection in detail.
Fig. 9–27 Test Report window
Subsequently to this action, the status icons will no longer indicate if an action has been successful or not, but
instead if rectification has been applied. Rectified entries will be flagged with a green ( ) status icon, even if a
tested connection attempt has failed.
List 9–9 Rule Tester parameters – section TEST CONNECTION
Parameter Description