Barracuda Networks VERSION SP4 - Manual (Page 180)

178 Example Configuration
First start with defining the criteria for Identity Matching :
Since the Access Control Service in this sample setup is only reachable using private IP addresses we
can restrict the
Networks section to the private address ranges.
As a next step define the required health conditions. For the catch-all rule you can define the same
policies you require for known clients, as security policies usually further restrict unknown clients
instead of granting them lower health requirements.
To comply to the above mentioned security requirements set the following parameters:
The value Required <Auto-remediation> automatically enables the Barracuda NG Personal Firewall and
the Antivirus Scanner if they are deactivated.
To set the parameter Last AV Scan Not Older Than to Ignore is due to the reason that performing a regular
full-scan of the client computer takes quite some time. To enforce users to perform a full-scan during
working hours is not always welcome if their computer is slowed down.
The option Policy Matching (section Basic Matching) is set to One-of-following. Therefore you don't need to specify
further matching criteria.
List 13–1 Example configuration – Configure a Access Control Service Trustzone – Local Machine: Edit Policy Rule – Parameters
Parameter Value
NG Personal Firewall On Required <Auto-remediation>
Antivirus Scanner On Required <Auto-remediation>
Last AV Scan Not Older Than Ignore
AV Engine Required Last-2
AV Pattern Definitions Required Last-2
AV Engine/Pattern Action Manual
Allowed Vendors Trend Micro, Inc
Antispyware disabled