Barracuda Networks VERSION SP4 - Manual (Page 134)

132 VPN Component Configuration
• Close
Closes the NG VPN Client window.
10.3 Connection Dialog
The NG VPN Client can be started in the following ways:
• Click Connect after left-clicking the icon in the system tray.
• Use Start > All Programs > Barracuda NG Network Access Client > VPN Connector.
• Use the Pre-Connector (12.2 VPN Connector, page 167). For using the
Pre-Connector, a profile must already be configured.
• Execute rvpn.exe (12.3 Remote VPN (rvpn), page 169). Before using Remote
VPN, a profile must be configured.
The following values are required for a successful login to the VPN server:
• Profile list
Select a preconfigured profile for login here. The creation of new profiles is described in
10.6 Barracuda Networks Control / Preferences Dialog, page 137.
• Username and Password fields
Depending on the chosen authentication method, username and/or password must be
inserted here. With some authentication methods (Barracuda Networks authentication,
X509 certificate), only a password might be required. If this is the case, then the username
field is disabled.
Fig. 10–14 Profile selection in the Connect Dialog