Barracuda Networks VERSION SP4 - Manual (Page 130)

128 VPN Component Configuration
On the first start or If no working VPN profile for automated connecting has been defined before, the
client will show up with the
Default profile’s Connect dialog als shown below:
The VPN profile can be chosen using the Profile dropdown.
Clicking Connect either left-hand or at the bottom would then initiate a connection using the chosen
profile:
However, before connecting for the first time you will of course need at least one working VPN profile.
Fig. 10–8 NG VPN client – Connect dialog
Fig. 10–9 NG VPN client – Connect dialog