Barracuda Networks VERSION SP4 - Manual (Page 200)

198 802.1X – Technical Guideline
14.3.16 Shutdown
14.3.17 Operating System Shutdown
When the client computer is been shut down, the Barracuda NG Access Monitor will send a logoff
command to switch, causing the line protocol being disabled by the switch.
14.3.18 Operating System Logoff
When a user logs off his account from the operating system, the Barracuda NG Access Monitor follows
the same procedure as above.
14.3.19 Manual Logoff
It is possible, if required, to logoff manually using the Barracuda NG Access Monitor. To do so take
following steps:
• Enter the Barracuda NG Access Monitor Port Security section
• Select the network interface to log off
• Choose "Logoff" from the tasks menu on the left or through the context menu
of the network interface
To verify the logoff command was sent and executed properly, verbose output is required and needs
to show the following:
Table 14–14 phions.log
Output
[ 009003002002] sent command LOGOFF with answer [009003002003] about success
Table 14–15 phions.log
Output
[009002009001] monitor destroying
For every supplicant [009003002002] sent command LOGOFF with answer [009003002003] about success
[009003002002] sent command TERMINATE with answer [009003002003] about success
[009003009003] thread for adapter … ended
[009002009009] monitor destroyed