2 configure a new profile manually, Configure a new profile manually – Barracuda Networks VERSION SP4 User Manual
Page 129
Advertising
127 Barracuda NG Network Access Client - Administrator’s Guide
You can later call the wizard again by right-clicking
Modify Profile (Wizard) ...
at the respective VPN
profile entry.
10.2 Configure a New Profile Manually
Double-click the
Barracuda NG Network Access Client
icon ( ) in the system tray to open the VPN
component. This will bring up the client’s status window which is attached to the tray.
Clicking
Connect
(altered by
Disconnect
, if already connected) will open the client’s configuration
window.
Fig. 10–6 VPN Profile Wizard - Modify Existing Profile Using the Wizard
Fig. 10–7 VPN client – tray status window
Advertising