Notice, Perations, Pet hair lifter – Bissell PET HAIR ERASER 3920 User Manual

Page 8: Transporting cleaner, Clean filter indicator

background image


w w w . b i s s e l l . c o m

8 0 0 . 2 3 7 . 7 6 9 1




Pet Hair Lifter

1. To vacuum carpeting, while vacuum is in

upright position flip down until it clicks into

place on the front of the foot. Turn height

adjustment knob to pet hair setting.

2. To vacuum non-carpet surfaces flip up. Push the

yellow release button just above the feature,

and it will flip up and out of the way.

transporting cleaner

1. To move your cleaner from room to room, put

the handle in the upright position, tilt the cleaner

back on its rear wheels and push forward.

2. The cleaner can also be moved by using

the carrying handle.

clean filter indicator

the clean filter indicator tells you when

the air flow in your vacuum is reduced

due to dirty filters or a clog in the hose.

the indicator will remain green while

the unit is running until the airflow

is reduced by a clog or dirty filter. At

that time, it begins to change to red or

black. When it is fully red, the airflow

is reduced or clogged by a dirty filter.

Follow steps on page 11 to clean your

filters. All filters in the vacuum should

be cleaned or replaced when the

indicator turns red.
If the indicator turns black, there is a

clog in your hose. to check and remove

the clog, remove the hose from the unit

by turning the twist ‘n Snap hose to

the right. try to visually locate the clog,

then use a blunt long object such as a

broom handle to loosen and remove

the debris. once completed, reassem-

ble the hose to the unit.
If the indicator remains red or black

with the vacuum running, follow the

steps on page 15 to check for and

clear clogs.

notE: When your vacuum is turned

off, the clean filter indicator will go to

the red color setting. the clean filter

indicator only detects reductions in air-

flow when the vacuum power is on.



While vacuuming, certain

carpets and low humidity

conditions may generate small

static discharges. The discharges

are entirely harmless and are

not associated in any way with

the main power supply.

Clean Filter




right way to carry

wrong way to carry


This manual is related to the following products: