Philips AVENT Chauffe-biberon - Manual (Page 13)

Descaling
It is recommended to descale the bottle warmer every four weeks
to ensure it continues to work efficiently.
1 Mix 10 grams of citric acid with 200ml/7oz of cold water and pour
it into the bottle warmer. Switch on the bottle warmer and select
the milk warming setting for contents under 180ml/6oz for
10 minutes. Leave the solution in the bottle warmer until all
limescale has dissolved. You can purchase citric acid (SCF943)
at www.shop.philips.com/service. (Fig. 15)
Note: You can also mix 50ml/1.7oz of white vinegar with 100ml/3.4oz of
cold water to descale the appliance.
2 Unplug the bottle warmer before you empty it (Fig. 12).
3 Empty the bottle warmer and rinse its inside thoroughly. If you still
see traces of scale after rinsing, repeat the descaling
procedure (Fig. 13).
Environment
- Do not throw away the appliance with the normal household waste
at the end of its life, but hand it in at an official collection point for
recycling. By doing this, you help to preserve the
environment (Fig. 16).
Guarantee and support
If you need information or support, please visit www.philips.com/
support.
ENGLISH 13