Philips AVENT Chauffe-biberon - Manual (Page 9)

Using the bottle warmer
With this bottle warmer, you can quickly warm all Philips AVENT feeding
bottles and milk/baby food in containers and other baby food jars.
Note: Philips AVENT breast milk bags cannot be used in this bottle warmer.
Explanation of settings
- Off setting: The bottle warmer is switched off and the light is off.
On every other setting, the appliance is switched on and the light is
lit (Fig. 2).
- Defrost setting: Defrost a bottle/container of milk/baby food to liquid
state. No warming occurs.
- Milk warming setting for contents up to 180ml/6oz: Select this setting
when you want to warm a bottle of milk with a content up to
180ml/6oz.
- Food warming setting: Select this setting when you want to warm a
container/jar of baby food.
- Milk warming setting for contents over and including 180ml/6oz:
Select this setting when you want to warm a bottle of milk with a
content over and including 180ml/6oz.
Using the bottle warmer to warm milk
1 Put the mains plug in the wall socket (Fig. 3).
2 Place a bottle in the bottle warmer (Fig. 4).
3 Fill the bottle warmer with drinking water up to the level of the
milk in the bottle. In case of large amounts of milk, the maximum
level of water is approximately 1 cm below the top of the bottle
warmer. An accurate water level ensures correct warming
performance (Fig. 5).
4 Select the desired setting. See the warming reference table at the
end of this chapter to check how long the milk needs to be
warmed in the selected setting (Fig. 6).
ENGLISH 9