Billion Electric Company BIPAC-741 GE V2.0 - Manual (Page 10)

Billion BIPAC-741 GE V2.0 ADSL Firewall Router
6
6 LAN port 4
Lit when connected to Ethernet device
Green for 100Mbps; Orange for 10Mbps
Blinking when data transmit/received
7 MAIL
Lit when there is email in the email account
9 PPP
Lit when there is a PPPoA/PPPoE connection
13 ADSL
Lit when successfully connected to an ADSL
DSLAM
2.3 The Rear Ports
Port Meaning
1
LINE
Connect the supplied RJ-11 cable to this port when
connecting to the ADSL/telephone network.
2
CONSOLE
Connect a RS-232 cable to this port when
connecting to a PC’s RS-232 port (9-pin serial
port).
3 LAN
1X — 4X
(RJ-45
connector)
Connect an UTP Ethernet cable to one of the four
LAN ports when connecting to a PC or an
office/home network of 10Mbps or 100Mbps.
4
RESET
After the device is powered on, press it to reset the
device or restore to factory default settings.
0-3 seconds: reset the device
3-6 seconds: no action
6 seconds or above: restore to factory default
settings (this is used when you can not login to the
router, e.g. forgot the password)
5 PWR Connect the supplied power adapter to this jack.
6 Power
Switch
A Power ON/OFF switch