Billion Electric Company BIPAC-741 GE V2.0 - Manual (Page 31)

Billion BIPAC-741 GE V2.0 ADSL Firewall Router
27
3.6.3.4 Firewall
There are five items under the Firewall section: General Settings, Packet Filter, Intrusion
Detection, MAC Address Filter and URL Filter.
When you click General Settings, you get the following figure.
Firewall: When you enable the Firewall function, you can select one of the firewall security
policies. By default the firewall is set to disabled.
All blocked/User-defined: By default, all traffic between WAN and LAN are blocked. You
have to configure the type of traffic passed between WAN and LAN, please refer to Packet Filter
below.
High, Medium and Low security level: By default, your system uses High, Medium and Low
firewall security levels between the WAN and LAN. For example, when you select High, the
Port Filters of the Packet Filter screen will be set automatically according to High security level
settings.
Firewall Logging: When both the Firewall Security and Firewall Logging are enabled, the
device will detect the blocked and/or intrusion packets, once the setting has been configured.
Then the router will log the corresponding (blocking or intrusion detection) logs into the Event
Log under Status.
Select the Apply button to save the setting.
When you click Packet Filter, you get the following figure.