Billion Electric Company BIPAC-741 GE V2.0 - Manual (Page 37)

Billion BIPAC-741 GE V2.0 ADSL Firewall Router
33
Type: Check Dial Out to be a client, check Dial In to be a server. When this network router acts
as a client, please input the remote Server IP Address (or Hostname) to establish a connection.
When this network router acts as a server, please input the Private IP Address Assigned to Dial
in User address.
Username: If you are a Dial-Out user (client), enter the username provided by your Host. If you
are a Dial-In user (server), enter your own username.
Password: If you are a Dial-Out user (client), enter the password provided by your Host. If you
are a Dial-In user (server), enter your own password.
PPP Authentication Type: Default is Auto.
Data Encryption: The data can be encrypted by MPPE algorithm. Default is Auto, it is
negotiated when establishing a connection.
Key Length: The data can be encrypted by MPPE algorithm with 40 bits or 128 bits. Default is
Auto, it is negotiated when establishing a connection.
Mode: You may select Stateful or Stateless mode. The key will be changed in each 256 packets
when you select Stateful mode. If you select Stateless mode, the key will be changed in each
packet.
Idle Time: Auto-disconnect the broadband firewall gateway when there is no activity on the line
for a predetermined period of time. 0 means this connection is always on.
Click Apply after setting.
Connection Name: Give a name for this connection.
Type: Check Dial Out to be a client, check Dial In to be a server. When this network router acts
as a client, please input the remote Server IP Address (or Hostname) to establish a connection.
When this network router acts as a server, please input the Private IP Address Assigned to Dial
in User address.
Peer Network IP: Enter Peer network IP address.