Billion Electric Company BIPAC-741 GE V2.0 - Manual (Page 45)

Billion BIPAC-741 GE V2.0 ADSL Firewall Router
41
UPnP Port: Its default setting is 2800. It is highly recommended for users to use this port
value. You may wish to modify this port value, only if this value conflicts with other ports
already being used.
SNMP Access Control (downloading SNMP software is required in order to utilize this section)
Read Community: Specify a name in any string to be identified as the Read Community and
an IP address. This community string will be checked against the string entered in the
configuration file. Once the string name is matched, user obtains this IP address will be able
to view the data.
Write Community: Specify a name in any string to be identified as the Write Community
and an IP address. This community string will be checked against the string entered in the
configuration file. Once the string name is matched, user obtains this IP address will be able
to view and modify the data.
Trap Community: Specify a name in any string to be identified as the Trap Community and
an IP address. This community string will be checked against the string entered in the
configuration file. Once the string name is matched, user obtains this IP address will be
notified Traps.
3.6.4 Save Configuration to Flash
After configuring this network router, you have to save all of the configuration parameters to
FLASH.
3.6.5 Logout
To exit the website, choose Logout to exit completely. Please ensure that you have saved the
configuration settings before logout.
Be aware that the router is restricted to only one local PC accessing the configuration Web
pages. Once a current PC has logged onto the Web pages, other PCs cannot get access except
waiting for the current PC to log out of the page. If the previous PC forgets to logout, the second
PC can access the page after 3 minutes.