Billion Electric Company BIPAC-741 GE V2.0 - Manual (Page 33)

Billion BIPAC-741 GE V2.0 ADSL Firewall Router
29
Enable: Set True to enable this Intrusion detection.
Use BlackList: Set True to use router’s default backlist to protect router.
Use Victim Protection: Set True to enable Victim protection.
Victim Protection Duration: Input numbers.
DoS Block Duration: Input numbers.
Scan Block Duration: Input number.
Maximum TCP Open Handshaking Count: Input numbers.
Maximum Ping Count: Input numbers
Maximum ICMP Count: Input numbers
Select the Apply button to save the setting.
When you click the MAC Address Filter, you get the following figure.
The MAC filtering function enables you to configure your router to block internal users (MAC
address) from Internet access.
~ ~ ~ ~ Enable / Disable: Check Enable / Disable radio button to active / disable, respectively, the
MAC address filter function. If you check Enable, remember to choose either Allowed or
Blocked the MAC Address listed in the table, as shown above. If you select Blocked, the packet
with the MAC address in the table will be dropped and others will be forwarded. If you select
Allowed, the packet with the MAC address in the table will be forwarded and others will be
dropped. Then select the Apply button to save the setting.