Billion Electric Company BIPAC-741 GE V2.0 - Manual (Page 44)

Chapter 3 Configuration
40
Automatically dial-out for checking emails: When the function is enabled, your ADSL router
will connect to your ISP automatically to check emails if your Internet connection dropped.
Please be careful when using this feature if your ADSL service is charged by time.
Click Device Management to protect and obtain system control while allowing device
monitoring. This in turn provides enhanced security of the device.
Embedded Web Server
HTTP Port: Default value for HTTP port is 80. A desired value is also allowed. Simply
specify a user-defined port number.
Management IP Address: Specify an IP address allowed to logon and access the router’s
web server.. Note: IP 0.0.0.0 indicates all users who are connected to this router are allowed
to logon the device and modify data. ]
Expire to auto-logout: Specify a time frame for the system to auto-logout the device.
For Example: User A changes HTTP port number to 100, specified it’s own IP address to be
192.168.1.55, and set the logout time to be 100 seconds. Device will only allow User A
which IP address is 192.168.1.55 to logon to the Web GUI by typing: 192.168.1.254:100.
After 100seconds, the device will automatically logout User A.
Universal Plug and Play (UPnP)
~ ~ ~ ~ Disable: Check to disable UPnP function.
~ ~ ~ ~ Enable: Check to enable UPnP function.