Billion Electric Company BIPAC-741 GE V2.0 - Manual (Page 28)

Chapter 3 Configuration
24
Username: Enter the username provided by your ISP. You can input up to 128 alphanumeric
characters (case sensitive).
Password: Enter the password provided by your ISP. You can input up to 128 alphanumeric
characters (case sensitive).
Service Name: This item is for identification purpose. If it is required, your ISP will provide
you the information. Maximum input is 20 alphanumeric characters.
PPP Authentication Protocol Type: Default is Auto.
~ ~ ~ ~ Always on: if you want to establish a PPPoE session when starting up. It will also
automatically re-establish the PPPoE session when disconnected by the ISP.
~ ~ ~ ~ Connect to Demand: if you want to establish a PPPoE session only when there is a packet
requesting access to the Internet.
User Idle Timeout (in minutes): Auto-disconnect the broadband firewall gateway when there is
no activity on the line for a predetermined period of time.
Select one of the access methods among the 5 listed items and click Next to configure the right
connection method. It is almost the same as PPPoE. Please refer to the above description and
Section 3.5 Information from ISP.
is a short cut to the Quick Start page.
The WAN-DNS is shown as below.