Billion Electric Company BIPAC-741 GE V2.0 - Manual (Page 30)

Chapter 3 Configuration
26
The router does not have a real time clock on board; instead, it uses the simple network time
protocol (SNTP) to get the current time from the SNTP server from the outside network. Please
choose your local time zone, click Enable and click the Apply button. You will get the correct
time information after you ready establish a connection to the Internet. If you prefer to enter your
own SNTP server, please enter and use it as the first choice.
Resync Poll Interval (in minutes) is the periodical interval of router’s SNTP client to update (or
re-synchronize) the current time with SNTP server after it synchronized with SNTP server.
When you click Remote Access and then click Enable, you may temporarily permit remote
administration of the BIPAC-741 GE V2.0ADSL Firewall Router.
When you click Firmware Upgrade, it allows you to input the location of firmware stored on
your PC and click the Upgrade button to upgrade to the new firmware.
When you click Backup/Restore, it allows you to save your current settings into a file on your
PC. If you like to restore it back (input the location of this configuration file in the PC and click
the Restore button to save it back).
When you click Restart Router, you have two functions. One is to restart it with current
settings and the other is to restart it with factory default settings if you check Reset to factory
default settings.
When you click User Management, you are able to edit existing user’s database or to create
other user accessing this device.