Philips DECT Babyphone - Manual (Page 7)

EN
Battery operated use
1 Open the battery compartment by turning the cover (A-9) to
the left (
1 OPEN), using the palm of your hand.
Take off the cover.
2 Insert four 1.5V, AA batteries, noting the + and –
configuration inside the battery compartment (batteries are
not supplied; we recommend Philips Alkaline batteries).
3 Put the battery compartment cover (A-9) back in place.
Close the compartment by turning the cover (A-9) to the
right (CLOSE
2), using the palm of your hand.
➜ The baby unit is now ready for battery operated use!
Parent unit
The parent unit can be mains or battery operated.When
batteries are inserted, you will have an automatic back-up in
case of mains failure and you can carry the unit in and around
the house.
Mains operated use
1 Connect the the power adapter cord (B-14) to the power
supply jack (DC 3.6V / 200mA - B-3) of the parent unit.
2 Connect the AC power adapter (B-14) to a wall outlet.
➜ The parent unit is now ready for mains operated use!
Battery operated use
1 Open the battery compartment by sliding the cover (B-12)
downwards.
Getting your baby monitor ready for use
7