B&K AVR212 - Manual (Page 13)

9
FRONT PANEL
SLEEP HEADPHONE PRESET ENTER MENU SOURCE MODE SAVE
POWER
ON/OFF
POWER
ON/OFF
AVR 212 A/V RECEIVER
D
S U
I
R
G
R
I
O
T
U
A
N
L
D
1
Series 200
DOWN UP
t ¿
B&K Components, Ltd. B&K Components, Ltd.
B K C O M P O N E N T S
1 2 3 4
5
1. Headphone Jack - Stereo headphones having a standard ¼ inch binaural plug can be connected to the
headphone output. The receiver must be on and in HEADPHONE Mode for proper headphone operation.
2. Front panel buttons
SLEEP
PRESET
ENTER
SAVE
DOWN UP
SOURCE
MODE
MENU
Puts the receiver in standby (low power) mode.
Steps through audio presets for instant recall of setups.
Pressing ENTER recalls the preset.
Confirm selection or display current status of reciever.
Save a preset.
Press ENTER to accept.
Steps through menus, sources or other modes.
Steps through the audio / video sources.
Steps through audio modes.
Enter / exit menu system.
3. Main power switch - Removes all power to the receiver. Normal operation of the receiver requires the power
switch to remain on. Use the Sleep button for daily on and off of the receiver. It places the unit in standby mode
that allows turning back on with the remote control. Turn the receiver off with the main power switch when not
using the receiver for an extended period of time.
4. Volume control - For controlling system volume. Turning the encoder-type volume control clockwise increases
the volume level, counterclockwise decreases the volume level. The volume knob is also used to change other
receiver settings. See THE MENU SYSTEM and OPERATION
5. Display - The receiver display is a 16 character alphanumeric fluorescent display. Displays current status of
receiver and any changes being performed.