Adjusting the volume, Temporary level adjustments – B&K AVR212 User Manual

Page 51

Advertising
background image

47

ADJUSTING THE VOLUME

From Remote

From Front Panel

Action

VOLUME

∧ or VOLUME ∨

VOLUME KNOB

adjust volume

MUTE

can’t do from front panel

instant volume all the way down
press MUTE again to restore

Note: The front panel VOLUME KNOB is used to control multiple functions and, therefore, cannot always control
the volume. The VOLUME KNOB may control volume in the menu system when not used for parameter
adjustments. During normal operation the VOLUME KNOB may switch to controlling other functions but will return
to MASTER LEVEL after a few seconds. The remote’s VOLUME

∧ or VOLUME ∨ will always change master

volume level except in the SETUP SPEAKER LEVELS and SETUP ‘Source’ INPUT menus.

TEMPORARY LEVEL ADJUSTMENTS

Occasionally you may find that you can’t hear the dialog very well in a particular movie, or a movie has too much
bass, etc. You can temporarily adjust the center, surround, and subwoofer settings without changing the
permanent settings you made under the SETUP SPEAKER LEVELS menu.

From Remote

From Front Panel

Action

CENTER

À

or CENTER

§

see Zone 1 operation

adjust center volume

REAR

À

or REAR

§

see Zone 1 operation

adjust surround volume

SUB

À

or SUB

§

see Zone 1 operation

adjust subwoofer volume

Note: these settings are temporary and will be lost when you put your receiver to sleep or turn off the main power.
If you have particular temporary setting that you use often, you may save them in a preset.

















Z1 VOLUME 0.0

Z1 Master Volume 0.0 dB

Z1 CENTER 0.0

Z1 Center Volume 0.0 dB

Advertising