Choosing a source, Am/fm tuner – B&K AVR212 User Manual

Page 50

Advertising
background image

46

CHOOSING A SOURCE

In general, the selected source will appear at the Zone 1 output, the TAPE output, and the V1 output. To prevent
feedback, TAPE input will not appear at TAPE output and V1 input will not appear at V1 output.

From Remote

From Front Panel

Action

desired source
(press twice)

(SOURCE) step to source

select desired source - remote now controls source

B&K

return control to receiver if desired

Note: if your source has separate ON and OFF control like your receiver, pressing the source button twice will
also turn on that source. If not, you will have to hit POWER while the remote is still set to the desired source.

TAPE MONITOR - If you have an analog three-head cassette or reel-to-reel analog tape recorder you may wish
to use TAPE MONITOR, which allows you to hear exactly what is on the tape as you are recording.

From Remote

From Front Panel

Action

desired source
(press twice)

(SOURCE) step to source

select desired source or TUNER
source will appear on TAPE and V1 outs

wait a few seconds while receiver analyzes selected
source

TAPE
(press twice)

(SOURCE) step quickly to TAPE

select TAPE MONITOR
TAPE will appear on Zone 1 out

Note: The tape monitor loop only allows recording of the analog inputs. If you simply choose the source you wish
to tape without selecting the TAPE MONITOR then you are able to make an analog recording from either the
analog or digital inputs.

AM/FM TUNER

From Remote

From Front Panel

Action

1

B&K

make sure remote is in B&K mode

2

AM or FM

(SOURCE) step to AM or FM

select desired TUNER Band

3

TUNE+ or TUNE-

(UP) or (DOWN)

manually tune up or down to desired frequency
see AM/FM TUNER SETTING for DIRECT /
SEEK / TUNE

4

SEL or ENTER

(ENTER)

set FM stereo/mono

Note: For a few seconds after performing any tuner operation (AM, FM, or TUNE+/-) you may directly enter a
frequency from the remote control’s numeric keypad. In addition, the MONO or ST audio mode buttons on the
remote control may be used to select between mono and stereo.




D V D A n a 2 .0 4 8 k

D V D An a 2.0 48K B o th V id eo

S u r D P L II 7 M o vie V ariab le

T A P E A n a 2 .0 4 8 k

T AP E An a 2.0 48K B o th V id eo

S u r D P L II 7 M u sic V ariab le

F M 1 0 2 .5 2 .0 4 8 k

F M 87.9 2.0 48K B o th V id eo

S u r D P L II 7 M u sic V ariab le

Advertising