Receiver specifications – B&K AVR212 User Manual
Page 82
78
RECEIVER SPECIFICATIONS
Audio Specifications
Video Specifications
Frequency Response:
5 Hz - 20 kHz,
+
0/
−
0.5dB
Frequency Response:
20 Hz - 10 MHz
±3dB
Input Sensitivity:
2 V in, 1.5 V out (0dB)
Maximum Input Level:
2 V P-P
Maximum Output Level:
3 V
Maximum Output Level:
2 V P-P
Signal to Noise Ratio:
98 dB CCIR 2 k Weighted
Input Impedance:
50 k Ohms
Input Impedance:
75 Ohms
Output Impedance:
221 Ohms
Output Impedance:
75 Ohms
Noise Test Reference Level:
46 mV
Composite Video Inputs
7
Surround Outputs
8
Composite Video Outputs
5
Audio Analog Inputs
7
SVHS Video Inputs
7
Audio Analog Outputs
4
SVHS Video Outputs
5
Multi Channel Input
5.1 format (optional)
Digital Inputs coax/optical
6/5
Component Video Inputs
0
Digital Outputs coax/optical
1/1 (Zone 1), 0/1 (Zone 2)
Component Video Outputs 0
High/Low Pass Crossover Fc
Adjustable 20-200 Hz
High Pass Crossover Slope
6 or 12 dB/Oct
Low Pass Crossover Slope
6, 12 or 24 dB/Oct
Tuner Specifications
FM Section
Tuner Specifications
AM section
Frequency Range:
87.5 - 107.9 MHz
Frequency Range:
520 - 1670 kHz
Total Harmonic Distortion:
Less than 0.25%
Total Harmonic Distortion: Less than 0.3%
Frequency Response
20 Hz - 15 kHz, +1/ -3 dB
Capture Ratio:
2 dB
IHF (Usable) Sensitivity:
12 dBf
Mono/Stereo Sensitivity:
15 / 35 dBf
Sensitivity:
28 dBf
Alternate Channel Selectivity:
65 dB
Selectivity:
30 dB
Signal to Noise Ratio:
70 dB, A Weighted
Antenna Input Impedance:
75 Ohms
Antenna Input Impedance: 300 Ohms
Amplifier Specifications
Miscellaneous
Power rating: 8 ohms:
150 watts @ 1 kHz
Line voltage:
120/220/240 VAC
Frequency response:
5 Hz - 45 kHz
Power consumption:
1200 watts max
THD (S + N):
0.09 % @ 1 kHz
(10 amps @ 120 V)
Damping factor:
150
31 watts standby
Current (peak to peak):
28 Amps
Replacement fuses:
Line -12 Amp/250 Volt
Slew rate:
14 V/
µsec
(slow blow type)
Rails - 6 Amp/250 Volt
Dynamic headroom:
1.4 dB
Dimensions: 17"(w)x15"(d)x5.50"(h)
S / N (A-weighted):
95 dB
Weight:
50 pounds
Warranty:
See Limited Warranty
5 years receiver
1 year remote
Specifications subject to change without notice