B&K AVR212 - Manual (Page 15)

11
11. Control outs - Outputs that allow you to remotely control external devices. (See “Making The Connection“).
12. Optical and Coax Digital outputs - Zone 1 (A) optical and 1/8” mini-plug coax output to carry digital
information from the selected digital input of the receiver out to digital recorders, personal computers, etc.
13. Surround outputs - Variable level outputs for driving external power amplifiers or powered speakers.
14. Optical Digital inputs - Optical digital inputs are used to connect digital audio signals from your source to the
receiver.
The incoming signal may be PCM, Dolby Digital or DTS.
15. Coax Digital inputs - Coax digital inputs are used to connect digital audio signals from your source to the
receiver.
The incoming signal may be PCM, Dolby Digital (AC-3) or DTS.
(Optional)
DVD Audio inputs – Optional connections for a DVD audio or other 5.1 source device.
Center (TV-V3) RCA jacks - center front surround audio input
Sub (SAT) RCA jacks - sub audio input
Ls ( V2) RCA jacks - left rear surround audio input
Rs (CD) RCA jacks - right rear surround audio input
Lf ( V1) RCA jacks - left front surround audio input
Rf ( DVD/VLD) RCA jacks - right front surround audio input