B&K AVR212 - Manual (Page 20)

16
SURROUND OUTPUTS
Your receiver has multiple surround processor outputs for use with external amplifier(s) or powered speakers. The
AVR 315 receiver allows THX Surround EX compatibility via two Surround Back ‘S BACK’ processor outputs.
Here is a typical surround output setup
:
Subwoofer Output - Connect an RCA cable from the receiver’s SW output (part of the surround outputs. If your
subwoofer does not contain its own amplifier (powered subwoofer) you will need to acquire the use of an external
power amplifier. Connect the external amplifier’s speaker output to your subwoofer.
Connect to the Subwoofer 'SW'
power amplifier input
Connect to the Surround Left
'Sl' power amplifier input
Connect to the Surround Right
'Sr' power amplifier input
ZA AUDIO OUT
SURR
Connect to the Center power
amplifier input
Connect to the Left Front
power amplifier input
Connect to the Right Front
power amplifier input
FRONT
SUB CENTER
Connect to Zone 1 (A)
composite video monitor input
Connect to the Surround Back Left
'Sbl' power amplifier input
Connect to the Surround Back Right
'Sbr' power amplifier input
S BACK