Advanced features, Advanced, Zone 1 (a) setup – B&K AVR212 User Manual

Page 66: See advanced features), Warning

Advertising
background image

62

ADVANCED FEATURES

WARNING -

The following describes the advanced features of the receiver. Since changing some of

these functions may cause severe effects such as no sound or no remote control operation, we suggest you leave
this menu disabled (hidden) for normal operation. If you are unsure of what you are changing

DO NOT

perform

any advanced operations. These features may be activated by simultaneously pressing the SLEEP, DOWN, and
UP buttons on the front panel of the receiver.

ADVANCED

Usually these settings may be left set to the factory defaults. However, these settings allow additional
modifications to the operation of your receiver. Make sure you are in the SETUP SYSTEM MENU and your
remote is in B&K mode.

From Remote

From Front Panel

Action

1

À(PAUSE) or §(STOP)

(UP) or (DOWN)

move to Advanced

2

SEL or ENTER

(ENTER)

activate ADVANCED SYSTEM SETUP

Zone 1 (A) Setup

Zone A has been factory default set to use a Zone ID setting of 1. Zone 1 (A) configuration will allow you to set
maximum volume level, remote control ‘Zone’ ID, OSD enable, V1 tape mode and the surround operation. Make
sure you are in the ADVANCED SYSTEM SETUP menu and the remote is in B&K mode.

From Remote

From Front Panel

Action

1

À(PAUSE) or §(STOP)

(UP) or (DOWN)

move to Zone 1 (A) Setup

2

SEL or ENTER

(ENTER)

activate ADVANCED ZONE 1 (A) SETTINGS

MAIN MENU
1 Zone 1 Operation
2 Zone 2 Operation
3 Zone 1 Favorite Presets
4 Zone 2 Favorite Presets
5 System Setup
6 Memory Backup/Restore

next item SEL select
MENU exit menu system

5 System Setup

SETUP SYSTEM
1 Speakers
2 Displays
3 Inputs
4 Presets
5 Music Modes
6 Advanced

next item SEL select

MENU main menu

6 Advanced

SETUP ADVANCED

SYSTEM SETUP

ADVANCED SYSTEM SETUP
1 Zone 1 Setup 'A'
2 Zone 2 Setup 'B'
3 Power On Titles
4 Control Out
5 Security Options
6 DSP Usage
7 RS-232 Control Port

next item SEL select
MENU setup system

1 Zone 1 Setup 'A'

ADVANCED ZONE A SETTINGS
1 Max Level +15 dB
2 Zone ID 1
3 On Screen Display User
4 V1 Output Tape
5 Surround Modes Auto
6 Favorite Recall use ENTER

next item adjust

MENU advanced setup

1 Max Level +15 dB

Z1 SETUP "A"

ZA MAX LEVEL +15

Advertising