Belkin N Wireless Modem Router PM01527ea F5D8636-4 - Manual (Page 17)

15
N Wireless Modem Router
sections table of contents 1 2 3 5 6 7 8 9 10 4
CoNNeCTINg aNd CoNfIgURINg yoUR ModeM RoUTeR
1 .2 Replacing an existing Modem or Modem Router
Follow these steps if you currently have a modem or a modem router
that you will be replacing with your new Router .
Important: Please unplug the power adapter of your old modem from
your wall outlet first .
1 . Unpack your new Router from the box and place it next to
your old modem . Raise the Router’s antennas . Unplug your old
modem’s power cord .
2 . Locate the cable that connects your old modem to your computer .
Unplug that cable from your old modem, and plug it into any
yellow port labeled “Wired” on the back of your new Router .
3 . Locate the cable that connects your old modem to the ADSL wall
jack . Unplug it from your old modem and then connect it to the
gray port labeled “ADSL line” on the back of your Router .
4 . Plug your Router’s power supply into the black port labeled
“Power” on the back of your Router .
5 . Wait 20 seconds for the Router to start up . Look at the display on
the front of the Router . Make sure the “Wired” and “Router” icons
are lit in blue . If they are not, recheck your connections .
2
1
5
3
1
4
LAN
ADSL