Belkin N Wireless Modem Router PM01527ea F5D8636-4 User Manual
Page 80
78
N Wireless Modem Router
sections
table of contents
1
2
3
4
5
6
8
9
10
7
MaNUally CoNfIgURINg NeTWoRK seTTINgs
3 . If “Specify and IP address” is selected, your Router will need to be set
up for a static IP connection type . Write the address information in the
table below . You will need to enter this information into the Router .
4 . Write the IP address and subnet mask from the “IP Address” tab (3) .
Manually Configuring Network settings in Windows 98 or Me
1 . Right-click on “My Network Neighborhood” and select “Properties”
from the drop-down menu .
2 . Select “TCP/IP -> settings” for your installed network adapter . You will
see the following window .
(1)
(2)
(3)
5 . Click the “Gateway” tab (2) . Write the gateway address down in
the chart .
6 . Click the “DNS Configuration” tab (1) . Write the DNS address(es)
in the chart .
7 . If not already selected, select “Obtain IP address automatically” on the
IP address tab . Click “OK” .
Restart the computer . When the computer restarts, your network
settings are now configured for use with the Router .