Belkin N Wireless Modem Router PM01527ea F5D8636-4 - Manual (Page 72)

70
N Wireless Modem Router
sections table of contents 1 2 3 4 5 7 8 9 10 6
UsINg THe Web-based adVaNCed UseR INTeRfaCe
Changing system settings
The “System Settings” page is where you can enter a new administrator
password, set the time zone, enable remote management, and turn on
and off the NAT function of the Router .
setting or Changing the administrator Password
4 . You will see one more message . This message tells you that the Router
may not respond for as long as one minute as the firmware is loaded
into the Router and the Router is rebooted . Click “OK” .
5 . A 60-second countdown will appear on the screen . When the
countdown reaches zero, the Router firmware update will be
complete . The Router home page should appear automatically . If not,
type in the Router’s address (default = 192 .168 .2 .1) into the navigation
bar of your browser .
The Router ships with NO password entered . If you wish to add a
password for greater security, you can set a password here . Write down
your password and keep it in a safe place, as you will need it if you
need to log into the Router in the future . It is also recommended that
you set a password if you plan to use the remote management feature
of your Router .