Belkin N Wireless Modem Router PM01527ea F5D8636-4 User Manual
Page 39
37
N Wireless Modem Router
sections
table of contents
1
2
3
4
6
7
8
9
10
5
alTeRNaTe seTUP MeTHod
setting Custom domain Name server (dNs) settings
A “Domain Name Server” is a server located on the Internet that
translates Universal Resource Locaters (URLs) like “ belkin .com” to
IP addresses . Many Internet Service Providers (ISPs) do not require
you to enter this information into the Router . The “Automatic from
ISP” box
(1) should be checked if your ISP did not give you a specific
DNS address . If you are using a static IP connection type, then you
may need to enter a specific DNS address and secondary DNS
address for your connection to work properly . If your connection
type is dynamic or PPPoE, it is likely that you do not have to enter
a DNS address . Leave the “Automatic from ISP” box checked . To
enter the DNS address settings, uncheck the “Automatic from ISP”
box and enter your DNS entries in the spaces provided . Click “Apply
Changes”
(2) to save the settings
(1)
(2)